HRAP ANGLES
We produce high strength stainless steel HRAP Angles. Due to its high strength our angles are widely used in construction and structurals.
| Size Tolerance | ASTM A484 |
| Length | Minimum 3.00 meters to 6.70 meters or 10 feet to 22 feet |
| Length Tolerance | Available in special cut to length bars in tolerance -0/+50 mm (-0/+2 inch) |
| Straightness | 1mm/meter |
| Surface Finish | Hot Rolled Annealed Pickled & Shot Blasted |
| Heat Treatment | Solution Annealed |
| SIZE | THICKNESS |
|---|---|
| 20X20 ( 4/5" X 4/5") | 3 (1/8") |
| 25X25 (1" X 1") | 3, 4, 5, 6 (1/8", 1/6", 3/16" , 1/4") |
| 30X30 ( 1-1/6"X1-1/6") | 3, 4, 5 (1/8", 1/6", 3/16") |
| 32X32 (1-1/4"X1-1/4") | 3, 4, 5, 6 (1/8", 1/6", 3/16", 1/4") |
| 35X35(1-3/8"X1-3/8") | 3, 4, 5 (1/8", 1/6", 3/16") |
| 38.1X38.1(1-1/2"X1-1/2") | 3.17, 4.76, 6.35 (1/8", 3/16", 1/4") |
| 40X40(1-4/7"X1-4/7") | 3, 4, 5, 6 (1/8", 1/6", 3/16", 1/4") |
| 45X45(1-7/9"X1-7/9") | 3, 4, 5, 6 (1/8", 1/6", 3/16", 1/4") |
| 50X50(2"X2") | 3, 4 , 5, 6,9.52 (1/8", 1/6", 3/16", 1/4",3/8") |
| 60 X 60 (2-3/8" X 2-3/8") | 5, 6,7,8 (3/16", 1/4") |
| 63 X 63 (2-1/2" X 2-1/2") | 5, 6,9.52 (3/16", 1/4",3/8") |
| 65 X 65 (2-5/9" X 2-5/9") | 5, 6,7,8 (3/16", 1/4") |
| 70 X 70 (2-3/4" X 2-3/4") | 6, 7, 8, 9, 10 (1/4", 9/32", 5/16", 3/8",2/5") |
| 75 X 75 (3" X3") | 6,7,8,9,10,12 (1/4",9/32",5/16",3/8",2/5",1/2") |